MelvinSundberg

PLEASE NOTE 7 WAYS TO TREAT AC TO KEEP IT COLD AND STAY COLD

Home Improvement

Air conditioning is one of the facilities that need to be completed in your home. The air conditioner will help you get clean air and maintain the required temperature. Therefore, maintaining the air conditioner is very important, and you cannot ignore it. A well-maintained air conditioner will have a longer shelf life, provide cleaner air and save a lot of money. Ten steps can be taken to maintain the air conditioner, but if the air conditioner does not work again, you should seek professional help. For more information , please visit https://airconman.sg/.

 

  1. Turn off the air conditioner

You cannot repair the air conditioner during operation. This machine has some very dangerous moving parts, which can easily hurt you. Another risk of using air conditioning during lighting is the risk of electric shock. Make sure to turn off the power to the cast. This avoids the risk of electric shock and avoids cutting off moving parts.

 

  1. Remove debris

When the fan spins, it may pull some leaves and other debris into the external condenser. This may cause the air conditioner to not work properly, so make sure to clean it. Removing debris will help the fan run smoothly and get clean air from the equipment. It is very easy to remove the garbage. Please use a screwdriver and loose fasteners to lift the fan from the top of the air conditioner. Use a vacuum cleaner to remove all debris from the equipment.

 

  1. Clean the heat sink

The fin is the most important part of the air conditioner. Here, all particles are filtered to get clean air. To clean this part, you will need to use a brush, vacuum cleaner and garden hose. First rub the heat sink with a brush, and then use a vacuum cleaner to blow all the dust off. To remove indoor dirt, you need to spray the interior with garden pipes. Do not use a high pressure washer, otherwise it will damage the heat sink. Using air conditioning chemical repair will help you remove excess dust in the area.

See also  Where is home improvement set?

 

  1. Straighten the fins

If the heat sink is bent, make sure to straighten it to increase airflow. You can use a commercially available straightening tool, but if not, you can use a better tool. Operate gently until the fins are not damaged.

 

  1. Clean the surrounding area

After cleaning the air conditioner, you need to clean all the bushings around the equipment to ensure that no debris is pulled down again. Make sure to cut at least one meter of plants and branches in all directions and around. When not using the conditioner, make sure to cover the conditioner with plastic to prevent debris from falling into it. Do not completely shut down the system to prevent rust. In addition, do not turn off the air conditioner while in use.

 

  1. Leveling equipment

When the soil settles under your equipment, the soil may start to fall and you need to make sure to restore it to normal levels. When the system is in equilibrium, the compressor may quickly fail. If you have a heat pump device, you can tilt the pad slightly to make the melt run smoothly.

 

  1. Clean the evaporator coil

When performing air conditioning maintenance, another thing you need to do is clean the evaporator coil. To do this, you need to loosen some bolts or screws and wipe off the foil pipe after touching the coil with a comb to wipe off excess dust, and spray the coil with a coil cleaner. You cannot rinse.

 

  1. Clean the evaporator drain
See also  How Do You Select a Pittsburgh Moving Company You Can Trust?

The next thing to do is to clean the clogged evaporator. This is necessary so that the water channel can flow smoothly. As there will be no flooding, it can also protect your floor.

 

  1. Replace the blower filter

The blower filter should be replaced regularly at least twice a year. If your area is dusty, you can gradually replace it within a year. Make sure to replace the blower filter with the same airflow level for maintenance.

 

  1. Power off

After completing all the operations, your furnace is in a normal state, then the last thing to do is to turn it on and start cooling or heating your house.

 

The above steps will help you extend the service life of the air conditioner. However, if there are more complicated problems than this, you need to find a service company, and the air-conditioning service company will be equipped and experienced to deal with it at any time